Degradation prognostics of aerial bundled cables based on multi-sensor data fusion
February 28, 2024
Moez Ul Hassan, Tariq Mairaj, Taimoor Zafar, Waleed Bin Yousuf, Syed Aqueel shah,
Nondestructive Testing and Evaluation - Pages:19
Optimization of process parameters for laser welding of A5083 aluminium alloy
August 01, 2023
Salman Nisar, Ameera Noor, Syed Aqueel shah, Usama Siddiqui, Sohaib Zia Khan,
Optics and Laser Technology - Volume 163, Article Number 109435
Techno-economic analysis of incorporating up to 20% of wetland for the installation of a photovoltaic powerplant
June 01, 2023
Shehzadi Bushra Javeed, Syed Aqueel shah, Antash Najib, Eylia Abbas Jafri, Shaheryar Atta Khan,
Sustainable Energy Technologies and Assessments - Volume 57, Article Number 103212
Stirnol Engine: A combination of Nitinol (shape memory alloy) and Gamma Stirling Engine
May 01, 2023
Humayun Arif, Syed Aqueel shah, Tahir Abdul Hussain Ratlamwala, Khurram Kamal, Maqsood Ahmed,
Revista Mexicana de Fisica - Volume 69, Issue 3, Pages 1-8
Effect of Material Change on Stirnol Engine: A Combination of NiTiNOL (Shape Memory Alloy) and Gamma Stirling Engine
April 20, 2023
Humayun Arif, Syed Aqueel shah, Tahir Abdul Hussain Ratlamwala, Khurram Kamal, Maqsood Ahmed Khan,
Materials - Volume 16, Issue 8, Article Number 3257
Remaining Useful Life Prediction of Aerial Bundled Cables in Coastal Areas Using Thermal and Corrosion Degradation Models
August 01, 2022
Waleed Bin Yousuf, Tariq Mairaj Khan, Syed Muhammad Talha Tariq, Moez Ul Hassan, Syed Aqueel shah,
IEEE Transactions on Power Delivery - Volume: 37, Issue: 4, Page(s): 2543-2550
Study on the feasibility of alternatives for phenolic resins used in sand casting
January 01, 2022
Syeda Talat Arshad, Abid Shah, Syed Aqueel shah,
International Journal of Cast Metals Research - Volume 35, Issue 1-3, Pages 1-8
Evaluation of Heat Treatment Effect on the Tensile Strength of Mild Steel Welded Joints Using Ultrasonic Testing
June 01, 2021
Abid Shah, Ghazanfar Ali, Tariq Mairaj Rasool Khan, Syed Aqueel shah, Muhammad Imran, Salman Nisar,
Russian Journal of Nondestructive Testing - Volume 57, No. 6, Pages 455-464
Assessment and Characterization of Welded Mild Steel (E-6013) Using Ultrasonic Testing and Hilbert Huang Transform
May 01, 2021
Ayesha Khalid, M. Ghazanfar Ali, Tariq Mairaj Rasool Khan, Muhammad Imran, Salman Nisar, Syed Aqueel shah, Abid Shah,
Russian Journal of Nondestructive Testing - Volume 57, No. 5, Pages 401-407
Aero structure damage growth prediction using age-based state transition models.
April 01, 2021
Waleed Bin Yousuf, Waleed Bin Yousuf, Tariq Mairaj Rasool Khan, Syed Aqueel shah,
Engineering Failure Analysis - Volume 122, Article Number 105186
Evaluation of Heat Treatment Effect on Impact Strength of Glass Fiber–Reinforced Composite Material Using NDT Technique
February 13, 2020
Ali Zia Naqvi, Ali Zia Naqvi, Tariq Mairaj Rasool Khan, M. Ghazanfar Ali, M. Ghazanfar Ali, Muhammad Imran, Muhammad Imran, Syed Aqueel shah,
Materials Performance and Characterization - Volume 9, Issue 1, Pages 72-81
The role of dynamic response parameters in damage prediction
July 01, 2019
Behzad Ahmed Zai, MA Khan, Kamran A Khan, Asif Mansoor, Syed Aqueel shah, Majid Shahzad,
Journal of Mechanical Engineering Science - Volume 233, Issue 13, Pages 4620-4636
Low-Velocity Impact Characterization of Fiber-Reinforced Composites with Hygrothermal Effect
January 01, 2019
Behzad Ahmed Zai, M. A. Khan, M.K. Park, Majid Shehzad, M. A. Shahzad, Salman Nisar, S.Z. Khan, Kamran Khan, Syed Aqueel shah,
Journal of Testing and Evaluation - Volume 47, Issue 1
Investigation of entropy generation rate and its minimization in helical grooved tubes
October 23, 2018
Shamoon Jamshed, Shafiq R. Qureshi, Syed Aqueel shah, Ahmad Hussain,
Journal of Mechanical Science and Technology - Volume 32, Pages 4983–4991
Numerical Flow Analysis and Heat Transfer in Spirally Grooved Tubes in Heat Exchangers
June 28, 2018
Shamoon Jamshed, Shafiq R. Qureshi, Syed Aqueel shah,
Iranian Journal of Science and Technology-Transactions of Mechanical Engineering - NULL
Effect of carbon fiber winding layer on torsional characteristics of filament wound composite shafts
April 02, 2018
Mateen Tariq, Salman Nisar, Syed Aqueel shah, Tariq Mairaj, Sohaib Akbar, Muhammad Ali Khan, Sohaib Zia Khan,
Journal of the Brazilian Society of Mechanical Sciences and Engineering - NULL
Effect of hybrid reinforcement on the performance of filament wound hollow shaft
January 15, 2018
Mateen Tariq, Salman Nisar, Syed Aqueel shah, Sohaib Akbar, Muhammad Ali Khan, Sohaib Zia Khan,
Composite Structures - NULL
Determinants of Overhauling Failures: Evidence from OEM Intensive
Maritime Capital Projects
January 01, 2018
Muhammad Imran, Nadeem Kureshi, Tariq Mairaj, Salman Nisar, Syed Aqueel shah,
Industrial Engineering & Management - Volume 7, Issue 3, Pages 1-8
Reducing machining distortion in AA 6061 alloy through re-heating technique
January 01, 2017
A. Rafey Khan, S. Nisar, Syed Aqueel shah, M. A. Khan, S. Z. Khan, M. A. Sheikh,
Materials Science and Technology - Volume 33, Issue 6, Pages 731-737
Assessment of material properties of AISI 316L stainless steel using non-destructive testing
December 01, 2016
Sohaib Zia Khan, Sohaib Zia Khan, Tariq M. Khan, Yasir F. Joya, Yasir F. Joya, Muhammad A. Khan, Muhammad A. Khan, Sarah Ahmed, Sarah Ahmed, Syed Aqueel shah,
Nondestructive Testing and Evaluation - Volume 31. Issue 4. Pages 360-370
An Experimental Study on the Deterioration of Paint Coatings in the Bilges of a Sea Vessel
April 01, 2016
Tanzila Younus, Syed Aqueel shah, Tahir Abdul Hussain Ratlamwala,
Mehran University Research Journal of Engineering and Technology - Volume 35, Issue 2, Pages 171-180
Optimization of process parameters for machining of AISI-1045 steel using Taguchi design and ANOVA
December 10, 2015
Arsalan Qasim , Salman Nisar , Syed Aqueel shah, Muhammad Saeed Khalid, Mohammed A. Sheikh,
Simulation Modelling Practice and Theory - Volume 59, Pages 36-51
Effect Of T6 Heat Treatment on Mechanical Properties Of Ceramic Reinforced Casted Aluminum Alloy
June 15, 2015
Muntazir Abbas, Salman Nisar, Syed Aqueel shah, Faisal Imtiaz ,
Iranian Journal of Materials Science and Engineering - Volume 12(2), Pages 18-25
Material Removal Rate, Kerf, and Surface Roughness of Tungsten Carbide Machined with Wire Electrical Discharge Machining
February 20, 2011
Syed Aqueel Shah, Nadeem A. Mufti, Dinesh Rakwal, Eberhard Bamberg,
Journal of Materials Engineering and Performance - Volume 20, Issue 1, Pages 71-76